Skip to content Skip to navigation Skip to footer
POLARIS GEM

HELP CENTER

9/13/2021
GEM Replacement Keys

If you misplace a spare key, replacement key blanks are available for GEM vehicles. If both keys have been lost, you must replace the ignition. Contact your GEM Dealer for ignition assistance.  

Model Year 2016 and Newer GEM e2, e4, e6 and eL XD 
If your GEM is a late 2016 and newer GEM e2, e4, e6 or eL XD, a blank can be ordered from any GEM Dealer. The newest GEM body style is shown below. 

2016 and newer GEM

The replacement key (part number 4016506) must be cut to match an existing key. To order a replacement key, see your dealer. Not all dealers are able to cut key blanks; those blanks may need to be taken elsewhere to be cut.  

If both keys have been lost, the ignition must be replaced. The ignition switch is part number 4016457. Contact your authorized GEM Dealer for assistance ordering and installing a new ignition. 

1999-2016 Classic Gem, All Models 
If your GEM is an early 2016 (GEM Classic) model or older, you can obtain a replacement key by contacting Midwest Security Products directly at 800-767-6894 or visiting their website at www.midwestkeys.com. You will need to provide the key code, which starts with GC and is followed by three digits. The key code is stamped on the key and lock cylinder on the vehicle. The key will arrive pre-cut and does not need to be matched to an existing key. If you lose both keys, a replacement can be ordered. Provide your GEM dealer with the key code found on the vehicle's lock cylinder to get a new key.  

The early 2016 and older GEM Classic body style is shown below. 

1999-2016 GEM

GEM eM1400, eM1400 LSV and Polaris M1400 
For these models, key blanks are available that must be cut to match an original key. To order an extra or replacement key for your vehicle, please contact GEM customer service. Be prepared to provide your key number and VIN. A key can be duplicated by ordering a key blank (using your key number) and mating it with an existing key. Not all dealers are able to cut key blanks. Those blanks may need to be taken elsewhere to be cut. 

To identify which series the key is, take the first two digits on the original key and refer to the chart below. The key switch must be replaced if all keys are lost. The key switch assembly is part number 4013084. See your GEM Dealer for assistance ordering and replacing the ignition.  

GEM eM1400 LSV and Polaris M1400

Series Number Part Number
20 4010278
21 4010278
22  4010321
23 4010321
27 4010321
28 4010321
31  4110141
32  4110141
67 4010278
68 4010278

The eM1400, eM1400 LSV and M1400 body styles are shown below.

eM1400, eM1400 LSV

To locate a GEM Dealer near you, use the Dealer Locator.

Keyword(s) key , replace , ignition , switch ,